Products

Norton Sand Dollar

The Norton Sand Dollar has a unique patented design that allows you to smooth and prep the surface of the floor to properly accept the next coat of finish without the risk of swirl marks. The foam backing pad allows the product to abrade the surface without penetrating deep into the finish for an overall smoother floor.

The 20″ pad is specifically designed for sports floors. Available in three grits:

  • Coarse/Blue for surface prep for recoating
  • Medium/Red for between coats
    abrading of oil modified finishes
  • Fine/Yellow for waterbase finishes

Now, you can eliminate the risk of cutting through the
finish on marking lines and logos so everyone can get on with the game.

Features & Benefits

  • Pads have a long life (approximately 1500 sf/pad) and are extremely durable and tear resistant. The A/O grain bonded to the foam backing allows the pad to properly abrade the finish while still producing a very fine scratch pattern.
  • Contractors can get a great-looking finish without running the risk of adhesion problems caused by improper abrasion.
  • Pads resist loading but can be easily cleaned by vacuuming off or rinsing with water and then reused.
  • Used just like a screen or maroon pad, using a white pad or maroon pad as a driver and can be used on any kind of finish: oil, water, or acid cure; but not recommended for pre-finished floors. The cut-outs in the pad help with dust extraction and to minimize loading.
  • Traditional PSA strips can tear and curl under easily which could leave adhesive residue on the finish. Also, if hook and loop strips are used, the paper can curl under, and the hooks can scratch the finish. With Norton SandDollar there is no guessing at how many strips to use, what grit to use, and how to place the strips on the pad.
Share