SLABHARD

SLABREZ 47

SLABREZ 47 cement modifier can be used in both sprayable and patching mortar applications. This acrylic polymer concentrate is designed for sprayable cementitious compositions – like exterior insulation and finish

Cem-Rez R

Cem-Rez R is a standard resurfacer grade material with good flow characteristics. It is excellent for squeegee and broom finishes.

Cem-Rez T

Cem-Rez T is used to resurface residential and commercial concrete floors. Typical applications include driveways, walkways, porches and patios to entryways, pool areas and any other floor or deck that

Joint Shot™

JOINTSHOT™ is a two-component, rapid setting, self-leveling, 100% solids, polyurea joint sealant, and crack filler.

SLABHARD® Guard

SLABHARD® GUARD is a copolymer polish guard formulation that improves the surface sheen and stain resistance of conventional concrete, hardened concrete, or cement terrazzo floors.

SLABHARD® Densifier XL

SLABHARD® DENSIFIER XL is the premium hardener, concrete densifier and sealer for concrete surfaces. This penetrating lithium silicate treatment reacts with the concrete to produce insoluble calcium silicate hydrate within

SLABSTAIN™

SLABSTAIN™ Water-Based Stain Base & Concentrate is an easy-to-use, deep-penetrating, water-based coloring product that is much safer and easier to use than acid stains and comes in a variety of

SLABSEAL® 25

SLABSEAL® 25 is a tough pure acrylic concrete sealer in a solvent base. It is designed to protect and beautify all types of concrete with a high gloss durable clear

SLABSEAL® 35

SLABSEAL® 35 is a single component, waterborne, ultraviolet-stable, high-performance, fast drying acrylic emulsion. It is used as a vinyl chip clear grout coat or as a concrete and cementitious overlayment

SLABSEAL® 250 VOC

SLABSEAL® 250 VOC is a solvent-born acrylic, polyurethane concrete and masonry sealer. This low viscosity, two-component polyurethane is designed as a sealer and hybrid primer. It is a film-forming sealer

FASTFLO™ 80 / 80X

SLABHARD FASTFLO™ 80 is a two-component, abrasion, chemical, and stain-resistant, fast-curing polyaspartic basecoat and topcoat. This material is formulated to be used as a fast-turnaround, one-day system application direct-to-concrete polyaspartic.

EASYFLO™ 88 VOC

EASYFLO™ 88 VOC is a clear, 2-component, high solids, solvent-based polyaspartic coating product that gives you an extended working time. It is a tough, durable, UV-stable coating that has been

PROFILL™ FAST PATCH

SLABHARD PROFILL™ FAST PATCH is a two component, extremely low odor during installation, liquid applied, polyurethane-alloy for joint filling, non-structural crack repair and patching of concrete and masonry substrates. It

SLABSEAL® 200

SLABSEAL® 200 is a two-component, low odor, abrasion and chemical resistant, UV stable, waterborne aliphatic polyurethane finish coat. It is available in clear gloss, satin, and matte and it can

SLABSEAL® 100

SLABSEAL® 100 is a two-component abrasion, chemical, and stain-resistant aliphatic polyester polyurethane finish coat. It is available in clear gloss, clear satin, and can be pigmented in SLABHARD available colors.

SLABLOC® 100

SLABLOC® 100 is a clear 2-component, 100% solids, low odor, low viscosity epoxy that is specifically formulated as a moisture barrier primer to treat new and existing concrete substrates with

SLABLOC® 50

SLABLOC ® 50 is a High Performance 3-component water borne epoxy primer coating. It is sold as a two-component kit that is field extended with the third component, potable water.

SLABFLEX™ 400

SLABFLEX™ 400 is a premium quality 100% solids, two-part epoxy patching compound. It provides epoxy high build, maximum toughness, flexibility, and excellent chemical resistance in a quick drying paste.  

SLABFLEX™ 300

SLABFLEX™ 300 is a two-component, paste, 100% solids, semi-rigid epoxy joint sealant and crack filler. It features a combination of excellent adhesion and elongation not available in general purpose epoxy.