PC-260 is a two component, fast setting, fast curing, solvent
free, flexible, high performance, and high solids polyurethane
elastomeric coating that can be applied to suitably prepared
interior or exterior concrete, plywood and metal surfaces.
Due to its fast gel time, PC-260 is suitable for applications in
temperatures as low as 20°F (-6°C). It may …
PC-440/440SC is a single component, liquid applied, moisture cured, aromatic polyurethane elastomeric waterproofing base membrane, designed for use in most areas of California to be in compliance with air quality standards.
BENEFITS
Economical
Moisture Cured
Seamless Waterproofing Membrane
Poly-I-Gard™ 295/295OF is a two component, fast setting,
rapid curing and solvent free, high solids, hybrid aliphatic
polyurea elastomeric membrane. Poly-I-Gard™ 295/295OF can
be applied to properly prepared interior or exterior concrete,
plywood and metal surfaces. It is suitable for single or multiple
applications, in temperatures as low as 20°F (-6.67 C) and
is insensitive to …
Polyglaze® 400/400C/400SC is a polyester, aliphatic, single
component, liquid applied, moisture cured, polyurethane
topcoat for waterproofing membrane systems. Polycoat
Products manufactures products in different VOC’s ranging
from 100 to 340 gms/liter to comply with VOC requirements
in various regions.
BENEFITS
Durable
UV Resistant for Gloss Retention
Polyglaze® AL-50/50SC is an economical, aliphatic, single
component, liquid applied, moisture cured, polyurethane
coating. Polycoat Products manufactures products in different
VOC’s ranging from 100 to 340 gms/liter to comply with VOC
requirements in various regions.
BENEFITS
Excellent Weatherability
Good Color Retention
UV Stable
Polyprime® 172 is a single component, liquid applied, aromatic
polyurethane polyurea primer. This primer provides excellent
inter-coat adhesion. Polyprime® 172SC is designed for use in
Southern California to be in compliance with SCAQMD air
quality standards.
BENEFITS
Fast Curing
For SCAQMD, use
Polyprime® 172SC
One Component
Polyprime® 2180/2180SC is a two component, liquid applied, epoxy-polyamine primer with unique penetrating characteristics.
BENEFITS
Excellent Adhesion
For SCAQMD Areas
Seals Concrete
Polyprime® 3042 is a two component, NSF-61 approved liquid applied epoxy primer. This primer has been developed for use on carbon steel, non-ferrous metal, fiberglass, PVC pipe, as well as concrete and masonry.
BENEFITS
Low Viscosity Epoxy Coating
Provides Limited Chemical Resistance
Surface Tolerant Primer/Sealer
Versatile Application: Spray, Roll or Brush
…
Polyprime® U is a two component, high solids, liquid applied primer with unique penetrating characteristics.
BENEFITS
Fast Re-Coat Time
High Solids
Low Odor
Low Viscosity
TC-1 Basecoat Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Can be Feathered
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can be Made Very Flexible
Tested for …
TC-2 Smooth Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Can be Feathered
White Cement May be Tinted
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can …
TC-3 Medium Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Creates a Non-Skid Surface
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can be Made Very Flexible
…
TC-4 Fine Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Can be Feathered
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can be Made Very Flexible
Can …
TC-5 Grout Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Gray Grout Color
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
TC-6 Stamp Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives. TC-6 is an add water only product.
BENEFITS
High Strength
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Tested for Freeze-Thaw Characteristics
Can …
WP-81 & WP-82 Cement Modifiers are high solids acrylic-polymer modifiers that will give increased strength, flexibility and adhesion to most cement-based products. WP-81 & WP-82 make cement products
more waterproof, more stain resistant and will extend the life of cement products, especially if exposed to the elements. WP-82 is the low …
WP-90 Waterproofing Resin is a high solids acrylic-polymer modifier. WP-90 is a durable, multi-purpose resin with waterproofing characteristics, good flexibility and adhesion. WP-90 is fast drying, high-build and VOC compliant.
WP-91 Blue Waterproofing Resin is a high solids acrylic-polymer modifier. WP-91 is a durable, multi-purpose resin with excellent waterproofing characteristics, high flexibility and superior adhesion. WP-91 is fast drying, high-build and VOC compliant.
Westcoat WP-95 Waterproofing Membrane is an asphalt modified latex, elastomeric membrane, designed to create a thin-section, seamless, reinforced waterproofing membrane barrier and provides superior positive-side waterproofing protection. WP-95 incorporates an anti-microbial component that inhibits the growth of mold and mildew on the membrane surface and in damp environments.