Cem-Rez R is a standard resurfacer grade material with good flow characteristics. It is excellent for squeegee and broom finishes.
Cem-Rez T is used to resurface residential and commercial concrete floors. Typical applications include driveways, walkways, porches and patios to entryways, pool areas and any other floor or deck that requires the combined features of a non-slip, durable surface.
Cem-Rez T can offer the beauty of a colorful and renewed coating. …
APF CEM-SEAL is a water-based acrylic emulsion, used in a variety of decorative concrete applications. It is available in both clear and pigmented formulations, dries quickly, and is high-solids for single component emulsion type materials. APF CEM-SEAL forms a hard film, resists blushing, and provides excellent resistance to yellowing in …
ColorChrome® pigment is a metallic mica pigment designed to be dispersed in a variety of binders to create seamless floors with a unique, three-dimensional appearance. Depending on the application techniques used, the finished floor’s appearance can range from elegant to exotic, ColorChrome pigment is an ideal product for retail establishments, …
EASYFLO™ 88 VOC is a clear, 2-component, high solids, solvent-based polyaspartic coating product that gives you an extended working time. It is a tough, durable, UV-stable coating that has been specifically engineered as an easy-to-use topcoat sealant for all SLABHARD floor coating systems. EASYFLO™ 88 VOC delivers excellent chemical and …
EC-11 Water-Based Epoxy is a premium quality two-component, chemical resistant, long pot life epoxy coating. It provides epoxy toughness, medium gloss and durability, with the convenience of a water-based system.
BENEFITS
USDA/FDA Compliant
Water-Based
Moisture Tolerant
Chemical Resistant
Long Pot Life
Medium Gloss
Very Durable
Easy to Use
Very Fast Drying
…
EC-12 Epoxy Primer is a two component, 100% solids, low viscosity, moisture tolerant, fast drying, high strength and multi-purpose epoxy primer.
BENEFITS
USDA/FDA Compliant
100% Solids
Low Viscosity
Chemical Resistant
High Build
Convenient 2:1 Mix
High Strength
Superior Adhesion
EC-36 100% Solids Epoxy is a two-component, medium viscosity, low odor, high-build, chemical resistant epoxy.
BENEFITS
USDA/FDA Compliant
100% Solids
Medium Viscosity
Chemical Resistant
Convenient 2:1 Mix
High Strength
Low Odor
High Build
Superior Adhesion
EC-72 Epoxy Patch Gel is a high viscosity, two-component, 100% solids epoxy patching compound. It provides high-build, maximum toughness and excellent chemical resistance in a quick-drying gel form.
BENEFITS
Convenient Mixing
Fast Setting
High Build
Chemical Resistant
Excellent Durability
Moisture Tolerant
Semi-Rigid
Westcoat EC-95F and EC-95G are two component, high solids, solvenated, flat polyurethane topcoats. EC-95F Flat is a true flat, that will reduce or eliminate light reflection. Westcoat EC-95G is a gloss polyurethane topcoat. EC-95G is available in pigmented and clear gloss. The UV, mar and chemical resistant nature of these …
Epoxy 100 is a two-component, water-based epoxy system that features ease of application, very low odor and excellent overall coating performance. This material cures blush free over a wide range of temperatures and adheres tenaciously to a variety of substrates including damp or wet concrete. Because of its affinity for …
Epoxy 300 Flex was developed for industrial joint and crack repair. Its combination of resilience and physical strength allows it to absorb the impact of heavy loads and steel wheeled traffic. Epoxy 300 FLEX is a 100% solids, medium viscosity, flexible epoxy system. It has excellent elongation, hardness, and impact …
APF Epoxy 400 is a low viscosity, 100% solids epoxy used in a variety of flooring applications including high build coatings, aggregate-filled flooring, and decorative vinyl mosaic flake, color quartz, and epoxy pebble applications. APF Epoxy 400 provides an outstanding balance of physical strength and ease of application. APF Epoxy …
APF Epoxy 550 is a high-solids, low odor material designed as a
base coat for color chip flooring. Formulated with a high pigment
load, APF Epoxy 550 has excellent substrate hiding for use in a one
coat application allowing the contractor to omit the typical primer.
APF Epoxy 550 adheres tenaciously to damp or …
SLABHARD FASTFLO™ 80 is a two-component, abrasion,
chemical, and stain-resistant, fast-curing polyaspartic basecoat and topcoat. This material is formulated to be used as a fast-turnaround, one-day system application direct-to-concrete polyaspartic. It is available in clear gloss and can be pigmented with SLABHARD (Polyaspartic) PP Pigment Packs. It cures to an inert, …
APF Polyurethane 100 is designed as a high-performance topcoat for protective coating and seamless flooring applications. APF Polyurethane 100 is a two component, high solids, aliphatic polyurethane coating. Offering a combination of unique performance properties, APF Polyurethane 100 produces a high-gloss protective film which is very hard, flexible and impact …
APF Polyurethane 100 VOC is designed as a high-performance topcoat for protective coating and seamless flooring applications. Polyurethane 100 VOC is a two component, high solids aliphatic polyurethane formulated to be a lower VOC option to the standard Polyurethane 100. Offering a combination of unique performance properties, APF Polyurethane 100 …
APF Polyurethane 250 is a two-component, low viscosity acrylic urethane for use as a primer/sealer over a variety of surfaces. The use of special solvents and adhesion promoters gives this material excellent penetration and adhesion to minimally profiled concrete. APF Polyurethane 250 is UV stable for use in exterior applications, …
APF Polyurethane 250 VOC is a two component, low viscosity acrylic urethane for use as a primer/sealer over a variety of surfaces. APF Polyurethane 250 VOC is environmentally compliant in California and other VOC restricted areas. APF Polyurethane 250 VOC is UV stable for use in exterior applications, cures rapidly, …
Polyurethane 501 is a high-solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. APF Polyurethane 501 gives hard, durable coatings that feature good gloss, easy cleanability, and superior abrasion resistance. Resistance to yellowing from …
SC-10 Acrylic Topcoat is a medium viscosity 100% acrylic water-based coating. It is durable yet flexible and is one of the most chemical resistant acrylic resins available. It is a tough, low sheen, wear resistant coating.
BENEFITS
Fast Drying
Low Sheen
Water-Based
Easy Clean Up
Chemical Resistant-Alkali and Moisture Resistant
UV …
WESTCOAT SC-65 WB Clear Polyurethane Sealer is a two component, high solids, water-based, clear polyurethane sealer that is available in Gloss, Semi-Gloss and Flat sheens. SC-65 provides properties equal to that of traditional urethanes (such as, ease of cleanability, gloss retention and excellent abrasion resistance) with fewer health and environmental …
SC-70 Acrylic Lacquer Sealer is a clear, single component, VOC compliant solvenated lacquer sealer and glaze. It is a very hard acrylic polymer that is UV and stain resistant and is designed to protect
and beautify concrete substrates. The solvent base can help the material to penetrate and adhere to concrete. …
SLABFLEX™ 300 is a two-component, paste, 100% solids, semi-rigid epoxy joint sealant and crack filler. It features a combination of excellent adhesion and elongation not available in general purpose epoxy. It is formulated to provide concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is …
SLABFLEX™ 400 is a premium quality 100% solids, two-part epoxy patching compound. It provides epoxy high build, maximum toughness, flexibility, and excellent chemical resistance in a quick drying paste.
SLABLOC® 100 is a clear 2-component, 100% solids, low odor, low viscosity epoxy that is specifically formulated as a moisture barrier primer to treat new and existing concrete substrates with high moisture emission rates and high relative humidity. SLABLOC® 100 can be used as a single primer coat negative side …
SLABLOC ® 50 is a High Performance 3-component water borne epoxy primer coating. It is sold as a two-component kit that is field extended with the third component, potable water. It is designed to
field extend with potable water to reduce its overall viscosity to improve penetration of the concrete substrate. …
SLABREZ 47 cement modifier can be used in both sprayable and patching mortar applications. This acrylic polymer concentrate is designed for sprayable cementitious compositions – like exterior insulation and finish systems (EIFS) basecoats and adhesives and sprayable stucco-type coatings – and can be applied over a variety of surfaces. Applied …
SLABREZ® 100 is an easy to use three component system consisting of Parts A & B supplied by Desert Polymer Flooring, and a third component, potable water. It cures rapidly and it can be applied to dry or damp concrete. It is available in clear or pigmented formulations and is …
General Purpose Epoxy comes in standard cure, FC (Fast Cure), and LPL (Long Pot Life). It is an economic two-component pigmented epoxy that can be used as a primer, build coat, mortar binder or topcoat. It is a low viscosity, 100% solid, zero V.O.C., low odor epoxy.
BENEFITS
Complies with USDA, …
SLABREZ™ 500 is a two component, high build, high pigmented load epoxy binder that is especially designed to receive Desert Polymer Flooring’s vinyl chips systems. It is self-priming and is formulated as a moisture tolerant epoxy binder that bonds tenaciously to dry or damp concrete. It can be applied directly …
SLABSEAL® 100 is a two-component abrasion, chemical, and stain-resistant aliphatic polyester polyurethane finish coat. It is available in clear gloss, clear satin, and can be pigmented in SLABHARD available colors. It cures to an inert, tough, impact, abrasion, and chemical resistant finish coat. It is resistant to Skydrol, betadine, and …
SLABSEAL® 200 is a two-component, low odor, abrasion and chemical resistant, UV stable, waterborne aliphatic polyurethane finish coat. It is available in clear gloss, satin, and matte and it can be factory pigmented. It cures to an inert, tough, impact, abrasion and chemical resistant finish coat. Excellent adhesion direct to …
SLABSEAL® 250 VOC is a solvent-born acrylic, polyurethane concrete and masonry sealer. This low viscosity, two-component polyurethane is designed as a sealer and hybrid primer. It is a film-forming sealer that leaves the surface with a wet look. It is a non-yellowing UV stable sealer that is available in clear …
SLABSEAL® 35 is a single component, waterborne, ultraviolet-stable, high-performance, fast drying acrylic emulsion. This economical sealer can be used for a variety of decorative concrete surfaces.
BENEFITS
• Complies with USDA, FDA, Food Safety Modernization
Act.
• LEED® and Green Seal® requirements.
• VOC and EPA Compliant in all states and provinces in
North America. Cures …
TC-1 Basecoat Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Can be Feathered
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can be Made Very Flexible
Tested for …
TC-2 Smooth Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Can be Feathered
White Cement May be Tinted
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can …
WESTCOAT TC-29 Concrete Patch is a specially formulated proprietary cement blend that is used to patch and fill holes, spawls and minor cracks for interior concrete floors.
BENEFITS
Fast Drying
High Strength
Durable
Can be Feathered
Concrete in Color
Can be Polished
Accepts Color & Stain
Easy to Use-Just Add Water
…
TC-3 Medium Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Creates a Non-Skid Surface
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can be Made Very Flexible
…
TC-4 Fine Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Can be Feathered
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Can be Made Very Flexible
Can …
TC-5 Grout Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives.
BENEFITS
High Strength
Good Working Time
Gray Grout Color
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
TC-6 Stamp Texture Cement is a specially formulated portland cement, blended with a variety of silica sand and proprietary additives. TC-6 is an add water only product.
BENEFITS
High Strength
Excellent Adhesion to Most Surfaces
Helps to Waterproof and Increase Water Resistance
Safe, Water-Based (No Solvents)
Tested for Freeze-Thaw Characteristics
Can …
APF VaporSolve® Primer is a specially formulated, water-based epoxy primer, designed to provide superior adhesion over concrete with high levels of moisture vapor emission. When used with the companion finish coat, APF VaporSolve® 100 or APF VaporSolve LP, it completes the APF VaporSolve Ultra System that reduces moisture vapor emissions …
APF VaporSolve® 100 is a specially formulated, high-solids epoxy coating, designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. APF VaporSolve® 100 is suitable for concrete substrates indicating up to 99% RH when measured in accordance with ASTM F2170. …
APF VaporSolve® Joint Filler is a specially formulated, high-solids thixotropic epoxy paste, designed for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. APF VaporSolve® Joint Filler is suitable for concrete substrates indicating up to 99% RH when measured in accordance …
WP-81 & WP-82 Cement Modifiers are high solids acrylic-polymer modifiers that will give increased strength, flexibility and adhesion to most cement-based products. WP-81 & WP-82 make cement products
more waterproof, more stain resistant and will extend the life of cement products, especially if exposed to the elements. WP-82 is the low …
