EASYFLO™ 85 is a high-solids aliphatic polyaspartic coating engineered for fast-track installations and superior durability. Professional contractors use these polyaspartic flooring systems to protect concrete substrates in demanding commercial and industrial environments. This coating delivers a UV-stable high-gloss finish that withstands heavy traffic and chemical exposure.
EASYFLO™ 85 serves professional flooring contractors and facility maintenance teams. You can apply this coating in aircraft hangars, automotive showrooms, commercial kitchens, laboratories, manufacturing facilities and warehouse floors. It also functions effectively as a clear or pigmented topcoat over decorative resinous flooring systems.
EASYFLO™ 85 integrates seamlessly as a topcoat for various decorative concrete coatings and chip flooring systems. It requires an appropriate primer when you apply it directly to bare concrete or cementitious overlays. Don’t apply this product when relative humidity exceeds 80 percent or when temperatures fall outside the 60 to 90 degree Fahrenheit range.
Installers must prepare the surface according to ICRI Guideline No. 310.2R and ensure the concrete pH is nine or above. Mix the two-part system using a low-speed drill with a Jiffy Mixer paddle for two minutes. Pour the mixed material in ribbons and use a flat or notched squeegee to spread it evenly across the substrate. Back roll and cross roll the material immediately to achieve a uniform finish. Clean all tools immediately with acetone after you finish the installation.
What is the working time for EASYFLO™ 85?
You typically have 45 to 60 minutes of usable working time. High temperatures or high humidity will dramatically shorten this pot life.
Can I apply this coating directly to bare concrete?
No, you must use a suitable primer when applying this product directly to concrete or cementitious overlays.
How long does it take for the floor to cure?
The floor is dry to the touch in five to seven hours. It accepts light traffic in 24 hours and full vehicle traffic after three days.
What is the coverage rate for this product?
The coverage rate ranges from 130 to 200 square feet per gallon depending on the specific system and surface porosity.
Is this product UV stable?
Yes, it is a UV-stable aliphatic polyaspartic coating that resists yellowing over time.
EASYFLO™ is a polyaspartic coating product family within the SLABHARD® product brand portfolio. SLABHARD® is a product brand of Star Step Performance Coatings Group, sold through authorized locations. For additional information, visit www.slabhard.com.
SLABLOC® 150 is a two-component, 100 percent solids epoxy engineered for high-performance moisture-mitigation systems. Contractors apply it beneath resinous flooring systems or floor coverings in commercial and industrial concrete slabs to control elevated vapor emission rates. This formulation provides professional applicators and facility teams with a reliable, low-permeance barrier to protect sensitive topcoats.
Professional concrete flooring contractors rely on SLABLOC® 150 to condition substrates prior to applying topcoats. It’s commonly specified for interior concrete slabs exhibiting high internal relative humidity or elevated alkalinity. Typical environments include:
SLABLOC® 150 functions as a substrate conditioning and moisture control layer. It isn’t intended as a finished floor or exposed wear surface. Installers must cover this product with an approved SLABHARD® flooring system, cementitious underlayment or resinous topping. It enables successful installation of epoxy flooring systems in environments where moisture conditions would otherwise cause bond failure. Applicators must adhere strictly to the specified cure and recoat windows.
Contractors must mechanically prepare concrete substrates to an ICRI CSP 2 to 3 profile. Acid etching is strictly prohibited. Applicators must remove all surface contaminants completely prior to application to ensure proper adhesion. Substrate and ambient temperatures must fall between 50 and 90 degrees Fahrenheit and remain a minimum of five degrees above the dew point. Concrete can be damp during application but must remain free of standing water. Mix the two components thoroughly and pour the material immediately to maintain working time. High humidity and low temperatures will extend the cure time.
Can SLABLOC® 150 be used as a final wear surface?
No. It’s engineered strictly as a moisture vapor barrier beneath resinous flooring systems and requires an approved topcoat.
What are the required concrete surface preparation standards?
Substrates require mechanical preparation to an ICRI CSP 2 to 3 profile. Acid etching isn’t permitted.
Does this product meet ASTM F3010 requirements?
Yes. It exceeds performance requirements for two-component moisture-mitigation systems.
What types of topcoats are compatible with this product?
Contractors can apply moisture-sensitive floor coverings, cementitious underlayments and approved SLABHARD® resinous coatings over this layer.
How long is the working time for the regular cure version?
The regular cure formulation provides a 20 to 30 minute pot life at 73 degrees Fahrenheit.
Does this material handle high alkalinity?
Yes. It is engineered to perform reliably under sustained high-pH conditions in new and existing concrete slabs.
SLABHARD® is a product brand of Star Step Performance Coatings Group available through Alta Paints & Coatings and Desert Polymer Flooring, delivering high-performance flooring materials and moisture-mitigation solutions for industrial and commercial environments.
SLABKRETE™ UC Topcoat is a three‑component urethane cement topcoat engineered exclusively for urethane cement flooring systems. Designed as the final performance layer within SLABKRETE™ 100 FS installations, it seals broadcast aggregate, refines surface texture, and enhances long‑term durability, chemical resistance, and cleanability in demanding industrial and commercial environments.
Applied as a thin‑film seal coat, mid‑coat, or aggregate encapsulation layer (depending on system design), SLABKRETE™ UC Topcoat delivers strong adhesion to cured urethane cement and supports aggressive sanitation and wash‑down procedures. This low‑odor, low‑VOC formulation is suitable for occupied or sensitive facilities when installed under proper ventilation.
Ideal for urethane cement flooring systems installed in:
Color System
Color is carried through Part B.
Typical Coverage Ranges
Is SLABKRETE™ UC Topcoat a standalone coating?
No. It is designed exclusively as a topcoat within urethane cement systems.
What problem does it solve?
It seals broadcast aggregate, improves cleanability, refines surface texture, and enhances chemical and abrasion resistance.
Can it be used as a mid‑coat or seal coat?
Yes. It may function as a mid‑coat, topcoat, or aggregate encapsulation layer depending on system design.
Is it UV stable?
No. Yellowing may occur with UV exposure; this is cosmetic only and does not affect performance.
Where does the color come from?
Color is carried through the Part B component of the system.
What environments is it best suited for?
Industrial and commercial environments with chemical exposure, sanitation requirements, impact, and abrasion—such as food processing, commercial kitchens, labs, and manufacturing areas.
