The SLABHARD® Color Chip 1 Day System is a fast-track decorative polyaspartic flooring system engineered to deliver durable, seamless concrete protection with an attractive color chip finish—all within a single installation day under appropriate project conditions.
Built around rapid-curing FASTFLO™ polyaspartic technology, the system combines a pigmented base coat, decorative vinyl color chip broadcast and UV-stable protective topcoat to significantly reduce installation time compared with traditional multi-day decorative flooring systems. The result is a durable, attractive floor with excellent abrasion, chemical and stain resistance and rapid return-to-service for commercial and industrial environments where downtime matters.
The SLABHARD® Color Chip 1 Day System is designed for commercial and industrial concrete floors requiring decorative appearance, durable protection and accelerated installation.
Typical environments include:
One-Day Installation Capability → Less Downtime
Rapid-curing polyaspartic technology allows the complete flooring system to be installed within a single day under appropriate project conditions, substantially reducing the downtime associated with traditional multi-day decorative flooring systems.
Rapid Return-to-Service → Faster Facility Turnaround
Accelerated cure schedules help get commercial and industrial spaces back into operation sooner, making the system particularly valuable where extended shutdowns are difficult or costly.
Decorative Color Chip Broadcast → Customizable Finished Appearance
Partial- or full-broadcast decorative vinyl color chips create an attractive, seamless architectural finish while helping minimize the visibility of minor substrate imperfections.
UV-Stable Polyaspartic Technology → Long-Term Appearance
Aliphatic polyaspartic chemistry provides excellent UV stability and resistance to yellowing, helping preserve the appearance of the decorative floor over time.
Excellent Abrasion + Chemical Resistance → Durable Protection
The system is engineered for the wear and operational demands of commercial and industrial environments, providing excellent abrasion, chemical and stain resistance.
Seamless Surface → Simplified Maintenance
The continuous resinous surface creates an easy-to-clean floor designed for straightforward routine maintenance.
Finish Options → Application Flexibility
FASTFLO™ 80 Ultra and FASTFLO™ 80 FC Ultra provide rapid-cure finish options, while EASYFLO™ 88 can be selected when extended working time is needed for larger or more complex installations.
*Dependent on project conditions and selected system configuration.
The SLABHARD® Color Chip 1 Day System is a complete, multi-layer decorative polyaspartic flooring assembly. Each component serves a defined role in creating the system’s combination of rapid installation, decorative appearance and long-term protection.
Product: PROFILL™ Fast Patch
Function: Rapid-setting polyurethane-alloy repair material used to repair cracks, joints, pits, spalls and localized surface defects prior to system installation.
Product: FASTFLO™ 80 FC Ultra with Pigment Pack
Function: High-solids, UV-stable polyaspartic base coat providing rapid cure and excellent adhesion while serving as the binder for the decorative color chip broadcast.
Coverage: Approximately 160 sq. ft./gal. @ 10 mils WFT
Recommended Thickness: 8–12 mils WFT
Product: SLABHARD® Decorative Color Chips
Function: Broadcast into the wet polyaspartic base coat to create the system’s decorative appearance and surface texture while helping minimize the visibility of minor substrate imperfections.
Options:
Product Options:
Function: UV-stable polyaspartic finish coat providing abrasion, chemical and stain resistance while protecting the decorative broadcast and finished floor.
FASTFLO™ finish coats support the system’s accelerated return-to-service positioning, while EASYFLO™ 88 provides extended working time for larger installations or elevated ambient temperatures.
The SLABHARD® Color Chip 1 Day System is a multi-layer decorative polyaspartic flooring system for commercial and industrial concrete substrates. It combines a rapid-curing pigmented polyaspartic base coat, decorative vinyl color chip broadcast and UV-stable polyaspartic finish coat to create a durable, seamless decorative floor.
Under appropriate project conditions, the system’s rapid-curing polyaspartic technology allows the complete flooring system to be installed within a single day, significantly reducing installation time and facility downtime.
No. The SLABHARD® Color Chip 1 Day System is a polyaspartic flooring system. Its rapid-curing polyaspartic technology distinguishes it from traditional multi-day epoxy-based color chip systems.
Yes. Decorative vinyl color chips can be applied as either a partial or full broadcast, with the chip blend selected from available color options to create the desired decorative appearance.
The system can be finished with FASTFLO™ 80 Ultra, FASTFLO™ 80 FC Ultra or EASYFLO™ 88 depending on project requirements, installation conditions and desired working time.
Yes. The system uses aliphatic polyaspartic technology that provides excellent UV stability and long-term resistance to yellowing.
It is designed for commercial and industrial facilities that need durable decorative flooring with rapid installation, including manufacturing facilities, warehouses, automotive dealerships, aircraft hangars, healthcare facilities, laboratories, food and beverage facilities, retail spaces and educational environments.
When FASTFLO™ 80 Ultra or FASTFLO™ 80 FC Ultra is used as the finish coat, the published system guidance allows approximately 4–12 hours before light foot traffic and 24–72 hours before vehicle traffic, depending on conditions. Full chemical resistance is achieved at approximately seven days. Always refer to the applicable Product Data Sheets for project-specific cure requirements.
Choose from our collection of SLABHARD® decorative color chip blends designed for SLABHARD® flooring systems.
The SLABHARD® Grind & Seal WB System is a waterborne polyurethane concrete protection system engineered to enhance, protect and extend the life of mechanically prepared concrete surfaces in commercial, institutional and light-industrial environments. The system combines mechanical concrete preparation, crack and surface repair, a waterborne polyurethane sealing coat and a durable waterborne polyurethane finish to create an attractive, long-lasting surface while preserving the natural character of the concrete. Designed for environments where low-odor installation is important, the system provides excellent abrasion and chemical resistance, UV stability and simplified maintenance.
The SLABHARD® Grind & Seal WB System is suited for concrete floor installations requiring a natural architectural appearance, durable protection and low-odor application. Typical environments include:
Exclusions: This system enhances existing concrete rather than creating a new resinous flooring surface. Existing cracks, repairs, bug holes, color variation and other substrate characteristics remain part of the finished architectural appearance. Aggregate exposure levels cannot be guaranteed until mechanical grinding begins. Consult individual product Technical Data Sheets and confirm substrate and environmental suitability before installation.
The SLABHARD® Grind & Seal WB System is a waterborne polyurethane concrete protection system designed to enhance and protect mechanically prepared concrete. Each component serves a defined functional role within the system and must not be substituted with non-approved materials. Depending on project requirements and substrate conditions, the system may include the following components:
Surface Preparation
Crack & Surface Repair (As Needed)
First Coat
Finish Coat
Semi-Gloss and Matte finish coats require an initial application of SLABSEAL® 200 Clear Gloss before application of the selected finish coat.
Each component performs a specific function within the flooring assembly and must not be substituted with non-approved materials.
The SLABHARD® Grind & Seal WB System is a decorative concrete grind and seal protection system that enhances existing concrete through mechanical grinding followed by application of waterborne polyurethane protective sealers.
The system is suited for retail and commercial spaces, schools and universities, office buildings, healthcare facilities, laboratories, manufacturing facilities, warehouses, automotive showrooms, restaurants, food service areas, lobbies and other commercial, institutional and light-industrial environments.
The Grind & Seal WB System utilizes waterborne polyurethane technology, providing a low-odor formulation while delivering excellent abrasion resistance, chemical resistance, UV stability and long-term concrete protection.
No. It is a decorative concrete grind and seal protection system that enhances existing concrete through mechanical grinding followed by application of waterborne polyurethane protective sealers.
No. Existing concrete characteristics including aggregate, repairs, bug holes, color variation and other natural substrate characteristics remain visible and become part of the finished architectural appearance.
The level of grinding, aggregate exposure selected, finish sheen selected and condition of the existing concrete substrate collectively determine the final appearance.
The system offers Salt & Pepper, Medium Aggregate and Full Aggregate Exposure options. Final appearance depends on the condition and composition of the existing concrete substrate.
SLABSEAL® 200 is available in Clear Gloss, Clear Semi-Gloss and Clear Matte finishes. Semi-Gloss and Matte systems require an initial application of SLABSEAL® 200 Clear Gloss before the selected finish coat.
Not necessarily. Aggregate exposure depends on the existing concrete placement, finishing practices and grinding depth. Final appearance cannot be guaranteed until grinding begins.
Yes. The Grind & Seal WB System utilizes VOC-compliant system components.
The SLABHARD® Grind & Seal SB System is a decorative concrete grind and seal flooring system engineered to enhance, protect and extend the life of existing concrete surfaces in commercial, institutional and light-industrial environments. The system combines mechanical concrete preparation, crack and joint repair, penetrating primer technology and a UV-stable protective finish to create an attractive, durable surface while preserving the natural character of the concrete. Unlike resinous flooring systems that build a new surface over concrete, the Grind & Seal SB System enhances the existing substrate through controlled aggregate exposure and clear protective sealers, providing improved abrasion resistance, simplified maintenance, long-term UV stability and optional enhanced chemical resistance.
The SLABHARD® Grind & Seal SB System is suited for existing concrete surfaces requiring a decorative architectural finish with durable protection. Typical environments include:
Exclusions: This system enhances existing concrete rather than creating a new resinous flooring surface. Final appearance depends on the condition, density and composition of the existing concrete substrate, and aggregate exposure levels cannot be guaranteed until mechanical grinding begins. Consult individual product Technical Data Sheets and confirm substrate and environmental suitability before installation.
The SLABHARD® Grind & Seal SB System is a decorative concrete flooring assembly designed to enhance and protect existing concrete. Each component serves a defined functional role within the system and must not be substituted with non-approved materials. Depending on project requirements and substrate conditions, the system may include the following components:
Surface Preparation
Crack & Joint Repair (As Needed)
Primer
Protective Finish Options
Each component performs a specific function within the flooring assembly and must not be substituted with non-approved materials.
The SLABHARD® Grind & Seal SB System is a decorative concrete grind and seal flooring system that enhances existing concrete through mechanical grinding followed by application of protective clear sealers.
The system is suited for commercial buildings, educational and healthcare facilities, manufacturing facilities, retail spaces, warehouses, laboratories, automotive showrooms and service areas, aircraft hangars and institutional facilities.
No. It is a decorative concrete grind and seal system that enhances existing concrete through mechanical grinding followed by application of protective clear sealers.
No. Existing concrete characteristics including aggregate, color variation and many natural imperfections remain visible and become part of the finished architectural appearance.
The level of grinding, aggregate exposure selected and condition of the existing concrete substrate collectively determine the final appearance.
Yes. The system is suitable for both interior and exterior applications when installed according to published specifications.
SLABSEAL® 250 is the standard decorative finish providing UV stability and unlimited recoat capability. SLABSEAL® 100 should be specified where greater abrasion, stain and chemical resistance are desired.
Not necessarily. Aggregate exposure depends on the existing concrete placement, finishing practices and grinding depth. Final appearance cannot be guaranteed until grinding begins.
SLABHARD® is a product brand of Star Step Performance Coatings Group, sold through authorized locations. For additional information, visit www.slabhard.com.
